Valve ea Solenoid ea Pneumatic e Sebetsa Joang: Mofuta, Likopo

Valve ea Solenoid ea Pneumatic ke eng

A valve ea solenoid ea pneumaticke sesebelisoa sa motlakase se sebelisetsoang ho laola phallo ea moea lits'ebetsong tse iketsang. Ka ho matlafatsa kapa ho tlosa matla a khoele ea eona ea motlakase, e tataisa moea o hatelitsoeng ho tsamaisa likarolo tsa pneumatic joalo ka li-cylinder, li-valve le li-actuator. Li sebelisoa haholo ho itsamaiseng ea indasteri, li-valve tsa solenoid li netefatsa taolo e nepahetseng ea tataiso ea phallo ea moea, mesebetsi ea ho bula/ho tima, le taolo ea phallo.

Kakaretso ea Sehlahisoa sa Valve ea Solenoid ea Pneumatic

Valve ea solenoid ke karolo ea bohlokoa litsamaisong tsa pneumatic le hydraulic. E laola tataiso ea phallo ea mokelikeli, e nolofalletsa ts'ebetso ea mechini lifekthering le liindastering. Mohlala, e laola lisilindara tsa hydraulic/pneumatic ho khanna metsamao ea mechini.

Kamoo Li-valve tsa Solenoid tsa Pneumatic li Sebetsang Kateng

Ka hare hovalve ea solenoid ea pneumatic, kamore e koetsoeng e na le likou tse ngata tse hokahantsoeng le liphaephe tsa moea. Disiki ea valve e bohareng e pota-potiloe ke limakenete tse peli tsa motlakase. Ha khoele e le 'ngoe e matlafatsoa, ​​​​diski e fetoha ho thibela kapa ho bula likou tse itseng, e fetisetsa moea o hatelletsoeng ho khanna li-actuator (mohlala, li-piston tsa silindara). Kou e bulehileng ea ho kena e sa khaotseng e lumella moea o nang le khatello e phahameng ho phalla libakeng tse khethiloeng, e leng se nolofalletsang taolo e nepahetseng ea mechini.

Setšoantšo sa Wiring sa Solenoid Valve

Mefuta ea Li-valve tsa Solenoid tsa Pneumatic

Li-valve tsa solenoid tsa pneumatic li arotsoe ka lihlopha tse latelang:

1. Molao-motheo oa ho Sebetsa: Li-valve tse sebetsang ka ho toba kapa tse tsamaisoang ke mofofisi.

2. Tlhophiso ea Kou: Likou tse peli tsa litsela tse peli, likou tse tharo tsa litsela tse peli, likou tse hlano tsa litsela tse tharo (bakeng sa lits'ebetso tse fapaneng).

3. Palo ea li-volts: DC24V, AC220V, jj.

4. Likarolo tse Ikhethang: Mehlala e sa phatloheng, e sa keneleng metsi, e nang le matla a tlase.

Likopo tsa Bohlokoa ho Automation ea Liindasteri

- Taolo ea Litataiso: Laola katoloso/ho hula ha silindara.

- Phallo e Buloa/E Tiisitsoe: E sebetsa e le liswichi bakeng sa lipotoloho tsa pneumatic.

- Taolo ea Phallo: Fetola bophahamo ba phallo ea moea (mehlala e itseng).

Li-valve tse Tloaelehileng tse Sebelisang Li-valve tsa Solenoid tsa Pneumatic

Li-valve tsa Solenoid ke likarolo tsa bohlokoa bakeng sa ho laola ho buloa le ho koaloa hali-valve tsa pneumatic'me hangata li sebelisoa bakeng sa li-valve tse latelang:

- Li-valve tsa bolo tsa pneumatic

- Li-valve tsa Serurubele tsa Pneumatic

- Li-valve tsa Heke ea Pneumatic

- Li-valve tsa Taolo

- Valve ea Globe ea Pneumatic

- Li-valve tsa ho tima ha tšohanyetso (ESDV)

Lisebelisoa tsa pneumatic

TheLisebelisoa tsa pneumatice kenyeletsa:

1. Sefetola-Molaoli: E hlwekisa moya ka ho tlosa mongobo le ho tsitsisa kgatello.

2. Valve ea Solenoid: E laola phallo ea moea ho li-valve/li-actuator.

3. Phetoho ea Moeli: E hlahloba boemo ba valve (boemo ba ho bula/ho kwala).

Keletso ea Setsebi:

- Li-valve tsa solenoid tse 3/2para le li-actuator tsa pneumatic tse khutlang selemo.

- Li-valve tsa solenoid tsa litsela tse 5/2e loketse li-actuator tsa pneumatic tse sebetsang habeli.

Mokhoa oa ho Khetha Valve ea Solenoid ea Pneumatic

1. Tikoloho: Nahana ka mocheso, khatello, le mofuta oa khase (moea, mafura).

2. Mofuta le Sebopeho: E sebetsang ka ho toba khahlanong le e tsamaisoang ke mofofisi; meralo ea setulo se le seng/se habeli.

3. Litlhaloso tsa Tekheniki: Tekanyetso ea khatello, nako ea karabelo, sekhahla sa ho lutla, le litekanyetso tse thibelang ho phatloha.

4. Matla le Ts'ebetso: Motlakase o tsamaellanang (DC24V/AC220V); taolo ya letsoho/auto/remote.

5. Letšoao le Setifikeiti: Khetha mabitso a netefalitsoeng ke ISO bakeng sa botšepehi.

6. Ho Boloka Litšenyehelo: Beha boleng pele ho feta litheko tse tlase.

Li-valve tsa Solenoid tsa Letšoao la FESTO

Litekanyetso tsa IP bakeng sa Li-valve tsa Solenoid tsa Pneumatic

E tloaelehilengLitekanyetso tsa IP(Tshireletso ea ho Kena):

- IP65: E hanelang lerole + e hanela jete ea metsi.

- IP66/IP67: E thibelang lerole + e thibelang ho qoelisoa metsing.

- IP68: Tšireletso ea ho qoelisoa ka metsing nako e telele.

Litekanyetso tse sa Sireletseng ho phatloha (Melao ea IEC)

Lintlha tsa bohlokoa **litekanyetso tse sa phatloheng** bakeng sa libaka tse kotsi:

- Exd: E sa tjheseng mollo (liindasteri tsa oli/khase).

- Exe: Polokeho e eketsehileng (merafo, literene).

- Exia: Polokeho ea ka hare (thibelo ea ho hotetsa ka matla a fokolang).

- Fela/Exo/Exq: Tšireletso e khethehileng (meralo e nang le khatello/e tletseng oli/e tletseng lehlabathe).